Applications

Applications

Applications

Permanent gases




Permanent gases and light hydrocarbons

http://www.gassite.com/shop_image/editor/pplot.gif


Aromatic components using build-in trap

http://www.gassite.com/shop_image/editor/to_14.gif


Beer analysis

http://www.gassite.com/shop_image/editor/bierhs.gif



Ar, O2 and N2 in H2 (ppb level)

http://www.gassite.com/shop_image/editor/Image/ar-o2N.JPG



3 hydrocarbons in only 2 seconds (3 injections)

http://www.gassite.com/shop_image/editor/Image/fast%202s.jpg


permanent gases (CO and CO2 on micropacked column

http://www.gassite.com/shop_image/editor/Image/mircopackedN.JPG



Refinery gas: C6+ and C1-C5 in 200 seconds

http://www.gassite.com/shop_image/editor/Image/HC%20C6+.jpg



 

BTEX at low ppb level, using CompactGC equipped with PID (photo ionisation detector). The sample is injected directly onto the column, without pre-concentration. In this case, a run to run time of only 60 seconds is needed. The chromatogram shows BTEX at 100 ppb level; the detection limit is around 5 ppb, depending on the component. In combination with the optional pre-concentration trap, ppt levels are analysed.

http://www.gassite.com/shop_image/editor/BTX%20PID.jpg

 The CompactGC equiped with PID (Photo Ionisation Detector) analyses Ethylene in greenhouses down to 10 ppb.The chromatogram

 below shows the analysis of 42 ppb Ethylene in Fluegas in less than 30 seconds.

 

http://www.gassite.com/shop_image/editor/Ethylene%20in%20greenhouse%20gases.jpg

Applications